5
1. QUICK START STEPS
The following steps assume default settings:
1. Insert charged batteries in the camera (if not already
installed).
2. Insert the micro SD memory card into its slot.
3. Open the flap protecting the lenses.
4. Press the ON/OFF key:
If you have installed new batteries, configure
Battery Manager (see instructions in the User
Manual § 1.2.1).
If prompted, enter the date and time.
5. Aim at the target. An IR image (thermogram) of the
target appears in the display.
6. To save the thermogram and its associated visible
light image, press F2 to freeze the image and then
press F3. The images are saved in a file in the micro
SD card.
7. You can recall and view saved images on the camera,
or transfer images to a computer (using the USB
cable or a micro SD card reader) for analysis and
report generation with the provided CAmReport
software.
NOTE
: For more information, refer to the User Manual on
the USB drive.
