2
5/31/2017 - DOCUMENT NUMBER: 10-2207
© 2017 AEM Performance Electronics
30-2207 GPS Module
Installation
The GPS Module is equipped with an AEMnet connector (power, ground, and CAN) so that it is a true plug and play
experience when used with other AEMnet products such as the Infinity ECU and CD series of dash displays.
Ideally, the GPS Module should be installed inside the vehicle in an area away from extreme temperatures or moisture.
The module should be mounted using the provided "hook-and-loop" material or may be more rigidly mounted using
fasteners through the module's mounting ears. Take care to avoid over-torquing mounting fasteners, if used.
The antenna should be mounted in a location where the top is pointed towards, and has a clear view of, the sky. The
bottom of the antenna is magnetic or additional hook-and-loop material is provided for mounting; the dashboard or rear
package shelf are
not
acceptable locations. The antenna should be mounted as high as possible in the center of a metal
roof away from other antennas or structures. If the roof of the vehicle is non-metallic then a flat piece of metal at least five
inches in diameter, to function as a ground plane, should be fabricated upon which the antenna should be placed.
