4
3. Installation of AEM
®
intake system.
a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
a. Cut two 9.5” lengths from small edge trim and install
on bottom of heat shield on opposite ends, as shown.
Install remaining length on the third edge as shown.
b. Install air filter adapter onto heat shield with provided
hardware as shown.
c. Install large edge trim onto top of heat shield, starting
from a corner, working around until secured.
d. Install and secure air filter to air filter adapter using
the provided large hose clamp.
