Read and understand these instructions BEFORE attempting to install this product.
le is parked on a level surface.
attery terminals.
urs let it cool down.
1) Getting started
a) Make sure vehic
b) Set parking brake.
c)
Disconnect both b
d) If engine has run within the past two ho
2) Removing the stock air inlet system
Upper clamp
Breather hose
a) Stock intake system.
b) Pull breather hose off of valve cover. Loosen the
upper and lower hose clamps on the stock inlet tube.
c) Unplug the MAF sensor. Remove stock inlet pipe.
d) Loosen the four nuts that hold the MAF sensor to the
Release four clamps on the air box and remove upper
air box from the vehicle.
airbox. Carefully set aside the MAF sensor.
