7
e. Install the edge trim as shown. Install the filter adapt-
er using the provided hardware in the orientation shown.
f. Attach the straight coupler to the filter adapter. Only
tighten the heatshield
-
side hose clamp at this time.
h. Fasten the heatshield at the shock tower with the
provided bolt.
i. Fasten the heatshield base to the lower rubber mount
with the provided nut.
j. Install the AEM DryFlow air filter to the filter adapter
with the provided hose clamp.
g. Lower the heat shield assembly into the engine bay
and connect the intake tube to the filter adapter. Then,
connect the factory air scoop to the heatshield.
