Read and understand these instructions BEFORE attempting to install this
product.
1)
Getting Started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Disconnect negative battery terminal.
d) If engine has run with in the past two hours let it cool down.
e) Do not discard stock components after removal of the factory system.
2) Removal of the stock intake system
Loosen and remove bolt
3
a)
Your stock intake system should look like this.
b)
Loosen and remove left bolt on the throttle body
cover.
Loosen and
remove bolts
Loosen hose
clamp
d)
With the throttle body cover off, loosen the hose
clamp at the throttle body.
c)
Loosen and remove the two remaining bolts on
the driver side of the throttle body cover.
