3. Installation of AEM
®
intake system.
a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
b. Attach the MAF adapter to the MAF sensor using
the supplied bolts and lock nuts.
©
d. Place the rubber elbow with two hose clamps onto
the throttle body. The longer end attaches to the
throttle body.
e. Insert the upper intake pipe into the rubber elbow.
Ensure the nipple on the intake pipe is pointing
toward the center of the vehicle as shown.
c. Attach the rubber reducer to the MAF sensor using
the size 52 hose clamp.
Size 52 clamp