AEM Performance Electronics CD-5 Carbon, Руководство пользователя

Страница: 118 / 120

118
Round Tacho Graphic Gauge
The round tacho graphic gauge allows a scaled pointer or needle to be drawn over a graphic image of a gauge. This
allows much more eye catching graphics to be used for round gauges than could otherwise be drawn dynamically by
the display hardware.
The round tacho graphic gauge has the following special properties:
·
Background graphic - the background gauge image.
·
X Centre, Y Centre - The centre of the gauge from which the logical centre of the pointer will be drawn.
·
Centre Offset - The number of pixels from the logical pointer centre at which the pointer will be drawn.
·
Length - The length of the pointer.
·
Start Degrees - The number of degrees from 6 o'clock (the zero degree position) that the starting value of the
gauge should be drawn.
·
End Degrees - The number of degrees from 6 o'clock (the zero degree position) that the end value of the
gauge should be drawn.
The gauge default rotation is clockwise. If you want anti-clockwise operation you switch the Start Val and End Val
settings.
12 Month Limited Warranty
Advanced Engine Management Inc. w arrants to the consumer that all AEM High Performance products w ill be free from defects in material
and w orkmanship for a period of tw elve (12) months from date of the original purchase. Products that fail w ithin this 12-month w arranty
period w ill be repaired or replaced at AEM’s option, w hen determined by AEM that the product failed due to defects in material or
w orkmanship. This w arranty is limited to the repair or replacement of the AEM part. In no event shall this w arranty exceed the original
purchase price of the AEM part nor shall AEM be responsible for special, incidental or consequential damages or cost incurred due to the
failure of this product. Warranty claims to AEM must be transportation prepaid and accompanied w ith dated proof of purchase. This
w arranty applies only to the original purchaser of product and is non-transferable. All implied w arranties shall be limited in duration to the
said 12-month w arranty period. Improper use or installation, accident, abuse, unauthorized repairs or alterations voids this w arranty. AEM
disclaims any liability for consequential damages due to breach of any w ritten or implied w arranty on all products manufactured by AEM.
Warranty returns w ill only be accepted by AEM w hen accompanied by a valid Return Merchandise Authorization (RMA) number. Product
must be received by AEM w ithin 30 days of the date the RMA is issued. UEGO oxygen sensors are considered w ear items and are not
covered under w arranty. Please note that before AEM can issue an RMA for any electronic product, it is first necessary for the installer or
end user to contact the EMS tech line at 1-800-423-0046 to discuss the problem. Most issues can be resolved over the phone. Under no
circumstances should a system be returned or a RMA requested before the above process transpires. AEM w ill not be responsible for
electronic products that are installed incorrectly, installed in a non-approved application, misused, or tampered w ith. Any AEM electronics
product can be returned for repair if it is out of the w arranty period. There is a minimum charge of $50.00 for inspection and diagnosis of
AEM electronic parts. Parts used in the repair of AEM electronic components w ill be extra. AEM w ill provide an estimate of repairs and
receive w ritten or electronic authorization before repairs are made to the product.