9
Powering the Everest
®
3 CPAP Device
The Everest CPAP System offers several choices for powering
your CPAP device: AC line power (an electrical wall outlet),
optional battery assembly, or optional mobile power adapter
(for 12V automotive type receptacles).
Using AC Line Power
1. Attach the AC Power Cord to
the Power Supply Module.
Warning
Use only AEIOMed
®
supplied AC power cord.
2. Insert the AC Power Cord plug into AC line power wall
outlet.
3. To attach the Power Supply Cord to the
CPAP:
a.
Hold the connector of the
Power Supply Cord so the arrow
symbol appears on the left side.
b.
Insert the connector into the
receptacle on the back of the
Everest CPAP device.
c.
The CPAP device is ready for
use.
AC Power Cord
to wall outlet
Power Supply Module
CPAP Device
Arrows
Power
Supply
Cord
Connector
Power Supply
Cord to CPAP
10
Using the Optional Battery Assembly
Caution
Use only the AEIOMed
®
battery assembly such
as may be supplied by your homecare provider.
Note:
The battery assembly consists of a charging bay and a
removable/replaceable battery cell pack.
Note:
Charge the battery assembly for at least 5 hours before
the first use.
1.
Slide the CPAP device along the
notched track of the Battery
Assembly, and secure it snugly in
place. (A)
2.
Hold the Battery Assembly Connector
so the arrow symbol appears on the
left side. (B)
3.
Insert the Battery Assembly
Connector into the receptacle
on the back of the Everest
®
3
CPAP device. (C)
4.
The CPAP device is ready for
use.
(A)
(B)
(C)
Receptacle on back of CPAP