Page 14
HELP!
Frequently asked questions
Q: Can I give additional remote controls to family members/friends etc.?
A: Yes - use part number RM01 (see opposite)
Q: In disarm (UNSET) mode, the alarm sounds when I walk in front of a sensor!
A: You must check the zone settings for the sensor that is activating the alarm. It should be
set to zone 1,2 or 3 for standard operation - see page 6 for details.
Q: The SolarGuard battery is completely discharged!
A: You can use the quick charge socket in the SolarGuard with a standard AC or DC 12V
mains adapter. This will charge the battery faster than sunlight.
Q: The LED in the PIR detector does not light up!
A: In NORMAL mode, the light will not come on when movement is detected.
Q: I have a sensor which appears to be out of range of the SolarGuard. How can I use it in
my system?
A: Use the range extender ET01-434 in conjunction with your sensor.
NEED MORE HELP?
At our web site,
www.aei.info
you can find a large selection of updated
FAQ’s, manuals, guides and an interactive user forum.
Alternatively, you can contact our support department by the following
means:
email:
telephone(UK):
0845 1667940
telephone(Intnl):
+ 44 1797 226122
Page 3
Introducing the
SolarGuard™ SG1100ARM
Congratulations in selecting the SolarGuard™
Wireless Burglar Alarm System. You have
taken a sensible step towards protecting your
family and property. The SolarGuard console
and wireless detectors provide an extremely
easy installation and are amazingly simple to
operate.
The SolarGuard™ power is maintained by an
internal sealed Lead-acid rechargeable
battery designed to retain operation for
approximately 3 years. The standby current is
incredibly small, thus allowing the solar panel
to maintain the battery charge when the
sirens are activated. In fact, the solar panel is
so sensitive it will even top up the battery in
very cloudy or overcast weather conditions.
The SolarGuard™ is fully protected by a
tough Polycarbonate UV proof housing. All
electronic components are protected with
moisture repellent material applied during
the manufacturing process to ensure long,
reliable, trouble free operation. Two integral
front and rear tamper switches give
maximum security to the unit. When
activated, the SolarGuard™ sounds a built-in
twin siren system at a powerful 115dB’s and
strobe (optional extra) will flash. The siren
duration is selectable from between 1 and 8
minutes. If it’s allowed to sound for the full
siren duration the strobe will latch and
continue for approximately 20 minutes or
until the system is disarmed.
