•
Press
**6862*
and select “Subscribe” on a handset. A sequence of RFPI number shows in handset display if
a nearby base is in paring mode.
•
If shown RFPI matches the numbers printed at the back of the base, press
LINE
(
LINE 1
) key to confirm pairing.
•
Otherwise, press
#
key to search again.
To pair multiple handsets to a base: (The base must be configured to pair with multiple handsets)
•
Reset base pairing by pressing
*112*811#
on the base
•
Pair handsets one by one via automatic or manual pairing descried above
Charging the Handset Battery
You would need to charge the handset battery before using the handset.
•
Install the battery into the handset.
•
Place the handset onto the base unit and base unit will start to charge the handset automatically.
•
The
message waiting indicator
at top of handset lights up in red during charging progress. The LED goes off after the
handset battery is fully charged.
•
For best performance, keep the handset in the telephone base or charger base when not in use.
•
The battery is fully charged after 10 hours of continuous charging.
•
If the handset will not be used for a long time, disconnect and remove the battery to prevent possible leakage.
4
Support
To configure through the web browser, do the following:
•
Ensure the phone is powered up and connected to a DCHP network.
•
Press HOLD/MUTE *112*113# (HOLD for 2-Line / MUTE for 1-Line), the IP address is displayed on the LCD
screen.
•
Open your browser (such as Internet Explorer, Firefox, etc.) and type in the web address of the phone. For
example, if the IP address you obtain in step 4 above is 192.168.1.2, enter the web address: http:// 192.168.1.2:8000.
•
When the Web login front page is displayed. Enter the user name and the password and click
Login
.
The administrator’s user name and password are “
admin
” and “
1234
” respectively.
5 Battery Safety Instructions
•
CAUTION: Use only supplied battery.
•
Do not dispose of the battery in a fire. Check with local waste management codes for special disposal instructions.
•
Do not open or mutilate the battery. Released electrolyte is corrosive and cause burn or injury to the eyes or skin.
The electrolyte may be toxic if swallowed.
•
Exercise care in handling batteries in order not to create a short circuit with conductive materials.
•
Charge the battery provided with or identified for use with this product only in accordance with the
instructions and limitations specified in this guide.
6 Important Information
•
Only use the battery provided by AEI, may be a risk of explosion if wrong type of battery is used.
•
Use only the power adapter supplied with this product.
•
If you do not use the handset for a long time, disconnect and remove the battery to prevent possible leakage.
•
You may place the handset into the base after each call in order to charge the battery.
•
For technical support, please email to [email protected]
Model:
VM-8200-SMKLT(S) / VM-8100-SMKLT(S)
