TOOLS REQUIRED
LOCKING THE SAFE
Drill
3/8” Drill Bit
3/16” Drill Bit
10 mm Socket Wrench
Flat Head Screwdriver
HARDWARE INCLUDED
SECURING THE SAFE
M8×70 mm(2”long) Lag Screws
Washers
Plastic Masonry Anchors
Installation may vary, please contact your local Hardware
Professional for additional installation recommendations.
To lock your safe, simply close the door and turn the knob counterclockwise.
For optimal security, this safe must be mounted to the floor. Failure to do
so will compromise the safety, security and warranty of the safe. Place your
safe in a cool and dry location
Remember to record the serial number of your safe from the tag on the
back of your safe.You will need this serial number for customer serice inquiries.
E-mail: [email protected]
Primetal LLC.
Office: 1150 S Milliken Ave, #1082, Ontario, CA91761, United States
For Customer Service needs, please contact us at:
www.primetalsafe.com
(4)
(4)
(4)
5
6
