AMPLIFIER
LEFT SPEAKER
R
L
Power Handling 20 – 120 watt
Impedance 8 ohm
Serial Number
DESIGNED AND ENGINEERED BY
ACOUSTIC ENERGY LIMITED, ENGLAND
MADE IN MALAYSIA
MAIN
Check that your amplifier is switched off before
installing your loudspeakers. Failure to do so may
result in speaker or amplifier damage.
The diagram illustrates one loudspeaker only. The
positive (ribbed) cable from the amplifier positive (or
red) terminal should connect with the positive (red)
terminal on the loudspeaker. Similarly the negative
(smooth) cable should connect the amplifier negative
terminal (black) to the negative terminal (black) on the
loudspeaker.
After wiring up:
Lower the volume to minimum,
switch on the amplifier, select the signal source and
then raise the volume to the listening level required.
Connection
AEGIS one manual 5/7/99 8:57 am Page 3
