4KPROIP
User Manual
11
Setting Up 4KPROIP-Hardware
One to One
One to one means connecting one source directly to one display. This is a simple “plug and play” set up
that does not need a 10 Gigabit Ethernet switch nor a software platform.
1.
POWER: Plug power of encoder and decoder with 12V/3A adaptor
2.
HDMI: Connect HDMI from active source, ie. PC or BD that supports HDMI 2.0 4K/HDR to Encoder
(HDMI port)
Connect HDMI from active display device ie. TV or screen that support HDMI2.0 4K/HDR UHD to
Decoder
**Recommend use HDIM 2.0 Premium cable for high resolution to reduce compatibility issues**
3.
CAT.5e: Connect CAT.5e cable from control device (ie.PC) to Encoder (1G LAN port) for transmitting
control instructions.
4.
CAT.6: Connect Ethernet cable either by Fiber or CAT.6A copper between Encoder (Fiber port or
10G LAN port) and Decoder(Fiber port or 10G LAN port) .
**Both Encoder and Decoder must be the same Fiber or Copper configuration.**
5.
AUDIO: Connect Audio line from active source to Encoder (Audio In/Out port) that supports PCM
L/R. Then connect Audio line from Decoder (Audio Out port) to Audio display device for playing out
the sound source.
6.
USB: In the optional port of USB for KVM feature, plug USB from control device (ie. PC or BD) to
Encoder (USB B port) act as a Host.
Then plug USB from Decoder (USB A port) to device (ie. keyboard, mouse etc.)
7.
IR: Plug IR receiver and sensor kits to both Encoder and Decoder for bidirectional IR signal channel
**This needs to be equipped with control software **