8
4KEXTENDER-100
4KEXTENDER-100-KVM
Receiver Panel W/O KVM
1.
POWER LED: This LED will illuminate when power adapter plug in
4KEXTENDER-100 Receiver.
2.
LINK LED: This LED will illuminate when Receiver connect compatible
Transmitter and all signal start to transmission.
3.
DC IN : 5VDC / 2.0 Amp Locking Power Jack
4.
HDMI OUT: Connect to HDMI sink devices, such as LED/LCD Monitor, LED/LCD
TVs, Projector and AV Receiver.
5.
IR TX: Transmitting IR signal to remote control HDMI sink devices via IR
Blaster Cable.
6.
IR RX: Receiving IR signal to remote control HDMI source devices via IR
Receiver Cable.
7.
RS-232: Connect to a serial control device via 3.5mm to RS232 Cable.
8.
RJ45: Connect to 4KEXTENDER-100 Transmitter with single Cat.6 cable for
HDMI, IR Blaster, IR Receiver and RS232 signal transmission.
