4KCHANGER-TC2
3.
Install the 4KCHANGER-TC2 Transmitter to the rectangle hole in your table.
4.
Under the rectangle hole of table, using each mounting screw slot on either side of
4KCHANGER-TC2 Transmitter.
5.
Twist the mounting screw in a counterclockwise direction. Be ensure the head of screw
are fixed tightly. Please do not overtighten the screw.
6.
From RJ45 output port of 4KCHANGER-TC2 Transmitter to connect RJ45 port of
4KCHANGER-TC2 Receiver by single Cat.6/6e/7 cable. (Sold separately).
7.
From Ethernet port of 4KCHANGER-TC2 Transmitter to connect your local Network
device by single Cat.5e/6 cable (Sold separately).
8.
From locking power port of 4KCHANGER-TC2 Transmitter to connect your local power
outlet by Universal locking power adapter.
9.
From HDM output port of 4KCHANGER-TC2 Receiver to connector your HDMI display
device by single HDMI cable. (Sold separately).
