DECT Settings
19
8
DECT Settings
8.1
Handset Settings
Handset settings allows you to view and modify the settings of your handset.
8.1.1
Registering your Voxtel Smart 3 to the base station
Your Voxtel Smart 3 handset has been pre-registered to the Base station by factory
default. If you have another Voxtel Smart 3 handset, you can follow the procedures here
to register it to the same Base station to form a multiple handset network.
1
Press and hold
N
on the base station for about 4 seconds until the
In Use / Message
LED
light turns on.
2
Release
N
.
3
On your Voxtel Smart 3, press
H
.
4
Tap
Settings
>
Dect Settings
>
Handset Settings
>
Registration
.
5
Tap
Base 1
and tap
Register
.
- The Voxtel Smart 3 will start to search for the base station.
6
Tap on
Enter Pin
box to launch the onscreen keyboard.
7
Enter the PIN code of the base station and tap
Register
.
- If successful,
“Success”
is displayed.
Note
If the PIN for the base station is set as
"0000"
(default), the Voxtel Smart 3 will register to
the base station without prompting for the PIN.
8.1.2
Registering your Voxtel Smart 3 to another base station
You can register your Voxtel Smart 3 handset to more than one base, and the base station
to which you wish to register the Voxtel Smart 3 must have a FREE handset location. You
must also know the PIN code of the base.
1
Press and hold
N
on the base station for about 4 seconds until the
In Use / Message
LED
light turns on.
2
Release
N
.
3
On your Voxtel Smart 3, press
H
.
4
Tap
Settings
>
Dect Settings
>
Handset Settings
>
Registration
.
5
Tap to select the base number and tap
Register
.
- The Voxtel Smart 3 will start to search for the base station.