8
5.3
Base station (see P4)
#
Meaning
9
Find
Press to page your registered handset(s).
Press and hold to start the registration process.
6 INSTALLATION
6.1
Connecting the base station (see P5)
t
Plug the power supply and line cord into the base station.
t
Plug the power adapter into a 110-230 Vac,50/60Hz mains socket and
the line cord into your telephone line socket.
Warning:
Use only the provided adaptor, using other power supplies may cause a
hazard or damage the phone.
Install the base unit in a position where the mains adapter plug will reach
an easily accessible mains socket to unplug in case needed. Never try to
lengthen the mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2
Installing and charging the batteries (see P3)
t
Place the 2 supplied batteries into the battery compartment with
the polarity markings. Use only the NiMH rechargeable battery type
provided with the telephone.
t
Position the battery compartment cover over the batteries and slide up
to click into place.
t
Put the handset on the base and charge for 15 hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
