AEG UltraMixKM4 series, Инструкция

Страница: 26 / 28

Disposal
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and
human health and to recycle waste of
electrical and electronic appliances.
Do not dispose appliances marked
with
the symbol with the household
waste. Return the product to your local
recycling facility or contact your mu-
nicipal office.
26
Troubleshooting
Troubleshooting
Problem Possible cause Solution
The motor slows down
during operation. Amount of dough may exceed maximum
capacity. Remove half and process in two batches.
Dough may be too wet, it sticks onto the side
of the bowl.
Add more flour, 1 tablespoon at a time until
the motor speeds up. Process until dough
cleans the side of the bowl.
The motor does not work. The appliance is not connected to the mains. Make sure to plug in the appliance before
operation.
The appliance vibrates/
moves during operation. The rubber feet are wet. Make sure the rubber feet at the bottom of
the unit are clean and dry.
It is normal for heavy loads (e.g heavy dough,
cheese).
Remove half and process in two batches.
The attachment scrapes
the Stainless steel bowl
during operation. The height of the attachment shaft is incor-
rect. Adjust the height of the attachment shaft.
The Work light and Power
indicator light flashes on
and off.
The Speed selector has been left turned on. Turn the Speed selector to “OFF”.
GB GB