AEG TP6060TW, Руководство пользователя

Страница: 20 / 52

12. TROUBLESHOOTING
Problem
1)
Possible cause Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to mains supply. Connect in at mains socket. Check
fuse in fuse box (domestic installa-
tion).
The loading door is opened. Close the loading door.
The On/Off (Ein/Aus) button was
not pushed. Push the On/Off (Ein/Aus) button.
The Start/Pause button was not
pushed. Push the Start/Pause button.
The appliance is in the standby
mode. Push the On/Off (Ein/Aus) button.
Unsatisfactory
drying result.
Incorrect programme selection. Do the selection of the applicable
programme.
2)
The filter is clogged.
Clean the filter.
3)
The Dry Plus () option
was in minimum level.
4)
Change the Dry Plus ()
option to the moderate or maxi-
mum level.
4)
Too high volume of the load. Obey the maximum load volume.
The airflow grill is clogged. Clean the airflow grill in the bot-
tom of the appliance.
Dirt on the humidity sensor in the
drum. Clean the front surface of the
drum.
Incorrect remaining laundry mois-
ture degree. Adjust remaining laundry moisture
degree.
5)
The heat exchanger is clogged.
Clean the heat exchanger.
3)
The loading
door does not
closed
The filter not locked in the posi-
tion. Put the filter in the correct posi-
tion.
The laundry is locked between the
door and the seal. Put the load correctly in the drum.
Err
(Error) on
the display.
You try to change the programme
or the option after the start of the
cycle. Turn the tumble dryer off and on.
Make the new selection.
The option you try to activate is
not applicable with the selected
programme. Turn the tumble dryer off and on.
Make the new selection.
www.aeg.com 20