9.9 Starting a program
4
To start the program:
Touch the Start/Pause button.
The appliance starts and the LED above the button stops flashing
and stays on.
9.10 Program change
To change a program:
1. Push the On/Off button to turn the appliance off.
2. Push the On/Off button again to turn on the appliance.
3. Set a new program.
9.11 Program end
Clean the filter and drain the water container after each drying
cycle. (See chapter CARE AND CLEANING.)
If the drying cycle is finished, the symbol appears on the display.
If the Buzzer option is activated, the acoustic signal sounds
intermittently for 1 minute.
If you do not turn off the appliance, the anti-crease phase starts
(not active with all programs). Flashing symbol signals the
execution of the anticrease phase. Laundry can be removed
during this phase.
34/60
DAILY USE
Downloaded from www.vandenborre.be
