AEG T9DEC866R, Руководство пользователя

Страница: 28 / 36

Problem Possible cause Remedy
Unsatisfactory
drying result.
Incorrect programme selection.
Select a suitable programme.
1)
The filter is clogged.
Clean the filter.
2)
Dryness Level option was set to
iron dry.
3)
Change Dryness Level option to a
higher level.
The load was too large. Do not exceed the maximum load
size.
The airflow slots are clogged. Clean the airflow slots at the bottom
of the appliance.
There is some dirt on the humidity
sensor in the drum.
Clean the front surface of the drum.
The dryness level was not set to the
desired level.
Adjust the dryness level.
4)
The condenser is clogged.
Clean the condenser.
2)
The loading door
does not close
The filter is not locked into position. Put the filter in the correct position.
Laundry is trapped between the door
and the seal.
Remove trapped items and close the
door.
It is not possible
to change the
programme or
option.
After a cycle starts it is not possible
to change the programme or option.
Turn the tumble dryer off and on.
Change the programme or option as
required.
It is not possible
to select an op‐
tion. An acoustic
signal is emitted.
The option you tried to select is not
available for the selected pro‐
gramme.
Turn the tumble dryer off and on.
Change the programme or option as
required.
There is no
drum light
Defective drum lamp. Contact the service centre to replace
the drum lamp.
Unexpected du‐
ration time ap‐
pears on the dis‐
play.
The drying duration is calculated ac‐
cording to load size and dampness.
This is automated - the appliance is
working correctly.
28/36
TROUBLESHOOTING