11.
TROUBLESHOOTING
Problem
1)
Possible cause
Remedy
The tumble dry-
er does not op-
erate.
The tumble dryer is not connected
to the mains supply.
Connect it to the mains socket.
Check the fuse in the fuse box (do-
mestic installation).
The door is open.
Close the door.
The Aan/Uit button was not push-
ed.
Push the Aan/Uit button.
The Start/Pauze button was not
touched.
Touch the Start/Pauze button.
The appliance is in standby mode. Push the Aan/Uit button.
Unsatisfactory
drying result.
Incorrect programme selection.
Select a suitable programme.
2)
The filter is clogged.
Clean the filter.
3)
Droogtegraad option was set to
strijkdroog.
4)
Change Droogtegraad option to a
higher level.
The load was too large.
Do not exceed the maximum load
size.
The airflow slots are clogged.
Clean the airflow slots at the bot-
tom of the appliance.
There is some dirt on the humidity
sensor in the drum.
Clean the front surface of the
drum.
The dryness level was not set to
the desired level.
Adjust the dryness level.
5)
The condenser is clogged.
Clean the condenser.
3)
The loading
door does not
close
The filter is not locked into posi-
tion.
Put the filter in the correct posi-
tion.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
It is not possible
to change the
programme or
option.
After a cycle starts it is not possible
to change the programme or op-
tion.
Turn the tumble dryer off and on.
Change the programme or option
as required.
It is not possible
to select an op-
tion. An acoustic
signal is emit-
ted.
The option you tried to select is
not available for the selected pro-
gramme.
Turn the tumble dryer off and on.
Change the programme or option
as required.
www.aeg.com
18
Содержание T6DB82GP
Страница 1: ...USER MANUAL EN User Manual Tumble Dryer T6DB82GP ...
Страница 24: ...www aeg com shop 136945981 A 432018 ...