AEG SR 4327 CD/MP3 страница 43 Скачать руководство пользователя

Страница: 43 / 78

English

guarantee full compatibility with all USB storage media.
For this reason there may be problems in rare cases
with playing back from USB storage media. This is

not

malfunction of the device.

1. Turn the function selector switch (7) to the CD/MP3/

USB position.

2. Keep

the

button (12) pressed down in order to

select USB mode. USB appears in the display.

3. Connect a USB storage medium. After a few seconds

the total number of tracks appears briefl y and then
playback begins. The current song and the letters

MP3 and USB appear in the display.

For operating instructions please see the section “Playing
CDs/MP3s”.

NOTE:

If there is no CD in the CD compartment at the same
time, the USB connection is automatically selected.

CAUTION:

Before you remove the USB storage medium turn the
function selector switch (7) to the RADIO position.

Card slot (21)

1. If you would like to play back data on an SD/MMC

card please insert it into the opening provided.

2. Turn the function selector switch (7) to the CD/MP3/

USB position.

3. Keep

the

button (12) pressed down to select

CARD mode. CARD appears in the display. After a few
seconds the total number of tracks appears and then
playback begins. The current song and

MP3 and

CARD appear in the display.

For operating instructions please see the section “Playing
CDs/MP3s”.

NOTE:

• If a USB storage medium is connected it is not

possible to select the memory card.

• If there is no CD in the CD compartment at the

same time, the card slot is automatically selected.

AUX IN socket

To connect analogue replay devices. Via this socket you
can also hear the sound of other playback devices such
as MP3 players, CD players etc. through the loudspeakers.

1. Please connect the external device with a 3.5 mm

stereo jack plug to the AUX IN socket (24).

2. Turn the function selector switch (7) to CD/MP3/USB

or RADIO. The device switches automatically to AUX
IN operation. The radio or CD sound is switched off .

3. Through the loudspeakers you can hear the playback

of the sound from the external device; with the
VOLUME control (8) you can change the volume. The
CD buttons do not have any function.

4. For the remaining procedure please see the operating

instructions of the external sound source.

NOTE:

Adjust the volume of the external device to a comfor-
table level.

Listening to the Radio

1. Turn the function selector switch (7) to the RADIO

position.

2. Use the band selector switch (5) to select the desired

frequency band.

VHF (Stereo) = FM ST., VHF = FM,

Medium wave = AM (Mono)

3. Tune in the desired station with the station adjust-

ment knob TUNING (4).

4. The FM.ST control lamp (14) only lights up when you

have selected FM stereo and the station is being re-
ceived in stereo quality. If reception is too weak and
there is noise on the station being received, this lamp
will fl icker. Where reception is bad we recommend
switching to FM.

5. For VHF/FM mode pull out the telescopic antenna (1)

and turn it to improve reception.

6. An aerial is integrated into the device for the recep-

tion of AM stations. The machine can be aligned
to the station by turning it. In this frequency band
programs are transmitted in „mono“ only.

Playing CDs/MP3

This is how you play a CD

1. Turn the function selector switch (7) to the „CD/MP3/

USB“ position. The time display appears.

2. Open the CD compartment (3) by pulling the lid

upwards by the tab (6).

3. Insert an audio CD with the printed side facing

upwards on to the central cone so that the CD clicks
into place and then close the lid of the CD compart-
ment.