AEG SMT355-1, Оригинальное руководство пользователя

Страница: 20 / 28

20 20
TECHNICAL DATA METAL CUT OFF SAW SMT355-1
Rated input 230V - 240V ~ 50 Hz
Rated power 2300 W
No-load speed 4280 min -1
Wheel thickness 3 mm
Wheel diameter 355 mm
Arbour hole 25.4 mm
Wheel type Type 41 reinforced abrasive wheel
Mitre capacity Right 45˚ / Left 45˚
Minimum workpiece dimensions
115 mm (L) x 3 mm (W) x 3 mm (H)
115 mm (L) x 3 mm (ø)
Weight according EPTA-Procedure 01/2003 17 kg
Measured sound values determined according to EN 62841:
A-weighted sound pressure level 91.5 dB (A)
Uncertainty K 3 dB (A)
A-weighted sound power level 104.5 dB (A)
Uncertainty K 3 dB (A)
Wear ear protectors.
Maximum cutting capacity
0° 115 mm 115 mm 120 x 115 mm 130 mm
45° 115 mm 100 mm 105 x 95 mm 100 mm
REPLACEMENT PARTS
Cutting wheel 089210129800
GENERAL POWER TOOL SAFETY WARNINGS
WARNING!
Read all safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.
Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators.
There is an increased
risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
When operating a power tool outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply.
Use of an RCD