2. Slide the top door off the pin (G). Un
-
screw the pin (G) and install it on the
opposite side.
3. Remove the two plugs from the middle
crossbeam and install them on the op
-
posite side, covering the holes left free
from the removed hinge.
4. Remove the plugs (1) on the upper side
of both doors and move them to the
other side.
5. Remove with a tool the cover (e), un
-
screw the lower hinge pivot (f) using a
10 mm spanner and re-screw it on the
opposite side.
6. Install the cover (e) on the opposite side.
7. Install the top door on the pin (G). Insert
the pivot of the middle hinge (H) into the
hole of the top door. Make sure that the
plastic space is placed under the hinge.
Install the bottom door on the lower
hinge pivot (f). Slightly tilting the doors
insert the pivot of the middle hinge (H)
into the hole of the bottom door.
8. Keeping the doors open, tighten the middle hinge with two screws.
G
1
1
2
5
3
4
e
f
28
Installation
