AEG S93880KMB0, Руководство пользователя

Страница: 16 / 32

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the
plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and
neutral soap emulsion for cleaning external surfaces.
Do not use detergents or abrasive paste as these will damage the paint, or stainless steel
anti finger print coating.
After cleaning, reconnect the equipment to the mains supply.
Replacing the Clean Air Control filter
To get the best performance replace the Clean Air Control filter once every year.
New active filters can be purchased from your local dealer.
Refer to "Installation of the Clean Air Control filter" for instructions.
Replacing the water filter
Remove the filter. A small amount of water will run out. Dry off and fit the new filter.
Refer to "Installation of the water filter"
Replacement filters can be ordered from Electrolux Service Force Centre,
The water connection does not need to be switched off when changing the filter.
Replacing the gas cylinder
Remove the gas cylinder, refer to "Installation of the gas cylinder"
The replacement gas cylinder is obtained through your local dealer.
Cleaning the water dispenser
When necessary, clean the surfaces of the dispenser, using only a soft cloth and warm wa-
ter.
The dispenser drip tray can be cleaned with a lukewarm water and some neutral soap. Lime
deposits on the dispenser surface can removed using vinegar or diluted acetic acid as clean-
ing agent. Wipe clean with a damp cloth.
Cleaning the ventilation grille
The ventilation grille can be removed for washing.
Make sure the door is open and then:
1.
Loosen the upper edge of the grille by
pulling outward/downward.
2. Pull the grille straight out to completely
remove it.
3. Vacuum clean under the cabinet.
Defrosting the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment ev-
ery time the motor compressor stops, during normal use. The defrost water drains out
16 Care and cleaning