AEG S93200KDM0, Руководство пользователя

Страница: 15 / 24

4. Check that no cut, or stray strands of
wire is present and the cord clamp
(
E
) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp
fuse ( B ). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard. Ensure
that it is disposed of safely.
8.4
Door reversibility
The door of the appliance opens to the
right. If you want to open the door to the
left, follow these steps before you install
the appliance:
1. Loosen and remove the upper pin.
2. Remove the door.
3. Remove the spacer.
4. With a key, loosen the lower pin.
5. Tighten the lower pin on the
opposite side.
6. Install the spacer.
7.
Install the door.
8.
Tighten the upper pin.
8.5
Ventilation requirements
The airflow behind the appliance must
be sufficient.
5 cm
min.
200 cm 2
min.
200 cm
2
8.6 Installing the appliance
CAUTION!
Make sure that the mains
cable can move freely.
1. If necessary cut the adhesive sealing
strip and then apply it to the
appliance as shown in figure.
x
x
2. Drill the unit using a Ø 2.5 mm drill
(10 mm max. penetration).
3. Fix the square fitting to the
appliance.
ENGLISH
15