AEG S53310KDW0, Руководство пользователя

Страница: 17 / 40

Problem Possible cause Solution
Food products placed in
the appliance were too
warm. Allow food products to cool to
room temperature before stor-
ing.
Water flows inside the re-
frigerator. The water outlet is clog-
ged. Clean the water outlet.
Food products prevent that
water flows into the water
collector. Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor. Attach the melting water out-
let to the evaporative tray.
The temperature in the ap-
pliance is too low/too high. The temperature regulator
is not set correctly. Set a higher/lower tempera-
ture.
The food products' temper-
ature is too high. Let the food products temper-
ature decrease to room tem-
perature before storage.
Many food products are
stored at the same time. Store less food products at the
same time.
If the advice does not lead
to the desired result, contact
the nearest Authorised
Service Centre.
6.2
Replacing the lamp
CAUTION!
Disconnect the plug from
the mains socket.
1. Pull the left side of the lamp cover
with your fingers to unlock it. Remove
the cover by pulling it towards
yourself.
1
2
1
2. Replace the bulb with one of the
same power and shape, specifically
designed for household appliances
(the maximum power is shown on the
light bulb cover).
3. Install the lamp cover.
4. Connect the plug to the mains
socket.
5. Open the door.
Make sure that the light switches on.
ENGLISH 17