50
How to change the bulb
Should the light fail to work you
can change it as below:
Break the circuit of the appliance.
Press the rear hook (1) and at the
same time slide the cover in the
direction indicated by the arrow
(2). So the bulb can be replaced.
(Bulb type: T 25 230-240 V, 25 W, E
14 thread)
After changing the bulb replace
the cover, snap it in place and apply
voltage to the appliance.
Electrical connection
This refrigerator is designed to operate on a 230 V AC (~) 50 Hz supply.
The plug must be put into a socket with protective contact. If there is no
such, it is recommended to get an electrician to fit an earthed socket in
compliance with standards near the refrigerator.
This appliance complies with the following E.E.C. Directives:
73/23 EEC of 19.02.73 (Low Voltage Directive) and subsequent modifica-
tions,
89/336 EEC of 03.05.89 (Electromagnetic Compatibility Directive) and
subsequent modifications.
Downloaded from Fridge-Manual.com Manuals
