11
UK
4.10 Call
alert
Your PMR can alert you to incoming signal by emitting an audible call
tone.
4.10.1 Call-ring
tone
You can send a call-ring tone to other PMR users to give an alert that
you want to communicate with them.
t
Press the call button
.
You will hear a ring tone for about two seconds;
TX
icon appears on
the LCD screen. Any other units within the transmitting range and
tuned to the same channel and sub-channel (if applicable) will hear
the call-ring tone.
4.10.2
Selecting a call- ring tone
The unit is equipped with1
5
different types of call-ring tones.
t
Press the menu button
8 times, the “CA” icon will display and
“01” is blinking on the LCD screen.
t
Press the up or down button to select the desired call-ring
tone.
>A respective call- ring tone sound will be played when changing
from one tone to another.
t
Press the
PTT
button to confirm your setting.
4.11
Setting the Roger beep
The Roger beep is a tone which is automatically transmitted whenever
the
PTT
button is released. This alerts the receiving party to inform
that you have intentionally ended the transmission and you are now
in receive mode.
t
Press the menu button
9 times, the “R0” icon will be displayed
while the “ON” icon is blinking on the LCD screen.
t
Press the up or down button to select the roger beep on/off.
t
Press the
PTT
button to confirm your setting.
4.12
Setting the key tone on or off
This feature allows the unit to emit a confirmation tone on pressing a
button.
t
Press the menu button
10 times, the “T0” icon will be displayed
while “ON” icon is blinking on the LCD screen.
