AEG OKO FAVORIT 80800, Руководство по обслуживанию, Страница: 6 / 20

The circulation pump, wash and heating
The circulation pump is driven by a single phase asynchronous motor with a 4mF
Capacitor connected to the start winding.
Different speeds are used during the wash cycle, (depending upon which part of
the program is being performed).
These speeds are controlled by a Tachometric generator fitted on the end of the
motor.
During parts of the program a pulsed wash action is used, eg, (last hot rinse).
This pulsed wash action runs:
4 seconds at 1600 rpm
0.8 seconds at 2800rpm
The diverter valve allows the water to be alternated between the upper spray arm
and the ceiling spray arms.
During the heating steps the water is only supplied to the upper spray arm.
Circulation pump and
Diverter valve
The Heater
A 2100 watt tubular heater is situated in the base of the appliance.
During the heating steps the water is directed only to the upper spray arm.
The resistance is 25