AEG OKO FAVORIT 5470 VI, Руководство по эксплуатации, Страница: 37 / 40

37
Electrical connection
WARNING - THIS APPLIANCE MUST BE EARTHED
Please ensure that the voltage and current indicated in the rating plate
agrees with the voltage of your electricity supply: 220/240 volts - (i.e.
220/240 V AC).
If your appliance has been equipped with a mains lead with moulded on type
plug. The plug moulded on to the cord incorporates a fuse. For replacement, use
a 13 amps BS 1362 fuse.
Only ASTA approved or certified fuses should be used.
The fuse cover/carrier must be replaced in the event of changing the fuse.
The plug must not be used if the fuse cover/carrier is lost. A replacement
cover/carrier must be obtained from an electrical goods retailer.
If the socket outlets in your home are not suitable for the plug fitted to the
appliance, then the plug must be cut off and an appropriate one fitted.
When fitting the plug please note the following points:
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH
THE FOLLOWING CODE:
Green and Yellow Earth
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
1. The wire which is coloured GREEN and YELLOW must be connected to the
EARTH terminal in your plug, which is marked with the letter E or by the
earth symbol or coloured GREEN , or GREEN and YELLOW .
2. The wire which is coloured BROWN must be connected to the LIVE
terminal which is marked with the letter L or coloured RED .
3. The wire which is coloured BLUE must be connected to the neutral
terminal which is marked with the letter N or coloured BLACK .