42
Important:
regularly check on the red temperature pilot lamp and
thermometer that the storage temperature is being mantained.
Door was opened for an
extended period.
Open the door only as long
as necessary. Press the fast
freeze switch.
Temperature is not pro-
perly adjusted.
Please look in the “Initial
Start Up” section.
A large quantity of warm
food was placed in the
appliance within the last
24 hours.
The freezer temperature is
not sufficient, red light
lights up, temperature
alarm signal sounds.
The appliance is near a
heat source.
Disturbance on the appli-
ance.
Press the fast freeze
switch.
Switch on the fast freeze
switch, keep the freezer
closed, inform your custo-
mer service.
Heavy build up of frost,
possibly also on the door
seal.
Door seal is not air tight
(possibly after changing
over the hinges).
Carefully warm the leaking
sections of the door seal
with a hair dryer (not hot-
ter than approx. 50°C). At
the same time shape the
warmed door seal by hand
such that it sits correctly.
Please, look in the
“Installation Location” sec-
tion.
Unusual noises.
Appliance is not level.
The compressor does not
start immediately after
changing the temperature
setting.
The appliance is touching
the wall or other objects.
A component, e.g. a pipe,
on the rer of the appliance
is touching another part of
the appliance or the wall.
Move the appliance slight-
ly.
If necessary, carefully bend
the component out of the
way.
Readjust the feet.
This is normal, no error has
occurred.
The compressor starts after
a period of time.
Malfunction
Possible Cause
Remedy
