AEG MRC 4121, Инструкция по эксплуатации

Страница: 69 / 126

English
69
Inserting the Battery (Backup)
(Battery is not included with the device)
In case of a power cut or if the device is unplugged, with backup battery inserted, the set-
tings will be kept.
1. Open the battery compartment at the bottom. Remove for this the screw of the bat-
tery compartment lid with a Phillips screwdriver.
2. Insert one battery of the type CR2032, 3 V. Mind the correct polarity ( must be at the
top)!
3. Close the battery case. Secure the battery compartment lid again with the screw.
4. If the device is not used for an extended period of time, remove the Battery from the
device to avoid any leaking of battery acid.
CAUTION:
Batteries are not to be disposed of together with domestic wastes. Dispose of the used
batteries at the relevant collection bin or at your dealer’s.
WARNING:
Do not expose the batteries to high temperatures or direct sunlight. Never throw batter -
ies into the fire. There is a danger of explosion !
Power supply
• Insert the grid plug into a properly installed three prong socket.
• Make sure the grid voltage corresponds to the figures on the rating plate.
• If you have not inserted a backup battery, the stored clock time will be lost as soon as
the power supply is interrupted.
Switching the Unit On/Off
Press the button (9) to switch the unit on or off.
Volume
Adjust the volume with the / DISPLAY button (8) and / SENSOR BEEP (10).
Display Brightness
Use the SNOOZE/SLEEP / DIMMER button (4) to adjust the display brightness.
Turn off display light
If you are disturbed by even the lowest brightness setting of the light, you can turn it off.