AEG MC 5651, Инструкция по эксплуатации

Страница: 31 / 60

English
31
Using the hair straightener
• Always start at the hairline.
• Place one strand between the heating elements and
close both elements using the lever.
• Slowly move the appliance towards the tips of the hair.
Using the curling tongs
• Press the lever to open the curling tongs.
• Clamp a hair strand into the tongs and then pull the curl
-
ing tongs down to the tips of the hair.
• Hold the curling tongs on the handle and the cool end.
• Twist the hair around the curling tongs, even up to close
to the hairline if desired.
• Hold the appliance in that position for max. 5 seconds in
order not to damage your hair.
• Then unwind the hair strand again.
Using the round brushes
• Twist one hair strand around the brush starting from the
tips all the way to the hairline. Hold the appliance in this
position for max. 5 seconds.
• Then unwind the hair strand again.
After use
• Let your hair cool down completely before continuing to
style it.
• Do
not
comb your hair afterwards if you want to keep the
curls strong. Just use your fingers for styling.
Switch-off
After use, slide the switch to position “ 0 ” and disconnect
from the mains.
Storage
• Leave the device to cool before putting it away!
• To do so, place the appliance onto one side of the hous
-
ing or hang it up by the suspension eye.
• The curling tongs and the small round brush feature an
additional base to hold the appliance.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damagen.
Maintenance and care
WARNING:
• Before cleaning remove the mains lead from the socked.
• Under no circumstances should you immerse the device in water
for cleaning purposes. Otherwise this might result in an electric
shock or fire.
• Allow the appliance to cool down completely before cleaning!
Risk of burns!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Remove hair from the attachments after every use.
• Clean the housing and the attachment with a damp cloth,
if necessary.
• Allow all parts to dry completely before using them again.
Technical Data
Model: ..................................................................................MC 5651
Power supply: ...............................................100-240 V~; 50/60 Hz
Power consumption:.................................................................25 W
Protection class: ................................................................................II
Net weight: .............................................................................0.20 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.