AEG LW 60.0, Инструкция по эксплуатации

Страница: 39 / 124

GB
39
Error/Problem Possible cause Correction
Battery voltage
too low Battery wasn’t charged long
enough. ensure the battery
is charged long
enough.
CLeaNINg, Care aND MaINte-
NaNCe
▪
Clean clamps after every charging. to prevent corrosion, wipe off any battery
fluid which may have come into contact with the clamps.
▪
Carefully wind the cable when storing the device. this will help prevent acciden-
tal damage to the cable and the device.
▪
Clean the product with a soft, dry cloth.
▪
Store the machine in a clean, dry place.
Service
Should you have any questions regarding commissioning or operating in spite
of studying these operating instructions, or if a problem should occur against all
expectations, please get in contact with your specialist supplier.
Disposal
the packaging consists of non-contaminating materials that you can dispose of at
your local recycling point.
Do not throw electrical appliances in with domestic waste!
In accordance with european Directive 2002 / 96 / eC for waste electrical
and electronic equipment (Weee) and conversion to national law, used electri-
cal appliances must be collected separately and taken to a recycling point. For
ways to dispose of old electrical appliances please contact your community or city
administration.
Illustrations may vary slightly from the product itself. We reserve the right to modify
the product in accordance with technical advances. Decoration not included.