AEG LF8C1612A, Руководство пользователя

Страница: 20 / 40

10. SETTINGS
10.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To
activate/deactivate this option,
touch the Stains/Prewash and the
Extra Rinse buttons simultaneously
until the indicator
comes on/goes
off on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
10.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The programme is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To
deactivate/activate
the acoustic
signals, touch the Extra Rinse and the
Delay Start buttons simultaneously for
about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
10.3
Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a
programme where it is selectable.
• To
activate/deactivate this option
touch the Extra Rinse button and the
Option button simultaneously the
relevant indicator
comes on/goes off
.
This option adds two rinses and the
display shows
.
10.4 Soft Plus
Set the Soft Plus option to optimise the
fabric softener distribution and improve
the fabric softness.
It is suggested when you use the fabric
softener.
This option increases slightly
the programme duration.
To activate/deactivate this option touch
the Temp. button and the Spin button
simultaneously until the indicator
comes on/goes off above the
indicator.
11.
DAILY USE
WARNING!
Refer to Safety chapters.
11.1
Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .
The display shows the maximum load,
the default temperature, the maximum
spin speed, the indicators of the phases
making up the programme and the cycle
duration.
www.aeg.com 20