If these operating instructions do not offer sufficient advice to elimi-
nate a specific fault, please contact our customer service.
Problem
Possible cause
Remedy
The drying cycle
exceptionally takes a
long time
Vented air transport disrupted
Straighten N- air venting hose and/or
clean air venting ducts
Lint filter blocked
Clean lint filter
The loading door
cannot be closed
Lint filter not installed and/or filter
lid not locked in position
Install lint filter and/or lock filter lid
in position
The drier ends the
drying cycle automa-
tically: “EINDE/FIN”
indicator is illumina-
ted shortly after pro-
gramme start
Too little or too dry laundry loaded
for selected programme
Select time programme or higher
drying level (for instance EXT-
RADROOG/TRES SEC instead of
KASTDROOG/A RANGER)
The drying cycle
exceptionally takes a
long time. 4,5 hours
after starting the
drying cycle:
“EINDE/FIN” indicator
is illuminated - dry-
ing cycle is aborted
- programme run
indicator flashes
“LAGE TEMP/DELICAT”- button
depressed and filling quantity too
large
Check programme selection: only use
“LAGE TEMP/DELICAT” -button for
laundry quantities up to 3 kg. Clean
lint filter.
Filling quantity too large
Reduce filling quantity
Laundry too wet
Pre-dry laundry more thorougly
26
Something not working?
37800_UK.qxp 7/1/2005 2:44 PM Page 26