22
Smoething not working?
Something not working?
If a problem occurs, you can try to solve it yourself following the instructions
below. If you call out an engineer when one of the following problems occurs,
or to repair a fault due to incorrect use, the call-out will be charged even if
requested within the guarantee period.
Problem
Possible cause
Remedy
The drier is not
working properly
Mains plug disconnected
Plug in mains plug
No programme selected
Select programme
Loading door open
Close loading door
Fuse or residual current cir-
cuit breaker in fuse box
(domestic installation) faulty
Check fuse or residual current
circuit breaker.
Faults can be eliminated by an
electrical engineer
The drying results are
not satisfactory
Wrong programme selected
Select another (time) programme
for the next drying cycle
Clean lint filter
Lint filter blocked
Observe recommended filling
quantity
Pre-dry laundry sufficiently
Wrong filling quantity
Laundry not sufficiently dried
Deposit on the drum inner
surfaceor on the drum ribs
Clean drum inner surface and
drum ribs
125981081.qxp 2005-04-13 10:49 Page 22