Problem
1)
Possible cause
Remedy
The loading
door does not
close
The filter is not locked into posi-
tion.
Put the filter in the correct posi-
tion.
Laundry is trapped between the
door and the seal.
Remove trapped items and close
the door.
It is not possible
to change the
programme or
option.
After a cycle starts it is not possible
to change the programme or op-
tion.
Turn the tumble dryer off and on.
Change the programme or option
as required.
It is not possible
to select an op-
tion. An acoustic
signal is emit-
ted.
The option you tried to select is
not available for the selected pro-
gramme.
Turn the tumble dryer off and on.
Change the programme or option
as required.
There is no
drum light
Defective drum lamp.
Contact the service centre to re-
place the drum lamp.
Unexpected du-
ration time ap-
pears on the dis-
play.
The drying duration is calculated
according to load size and damp-
ness.
This is automated - the appliance
is working correctly.
A programme is
inactive.
The water container is full.
Drain the water container, push
the Start/Pause (Départ/Pause)
button.
3)
The drying cycle
is too short.
The load size is small.
Select a time programme. The
time value must be related to the
load. To dry one item or a small
amount of laundry we recommend
short drying times.
The laundry is too dry.
Select an appropriate time pro-
gramme or a higher dryness level
(e.g.
extra dry (très sec))
www.aeg.com
20
