manualshive.com logo in svg

AEG LAVAMAT 86741, Информация пользователя

Поделиться
Скачать
AEG LAVAMAT 86741 Скачать руководство пользователя страница 22

Operating Instructions

22

Opening and closing the door

0 

Open: Press the DOOR/LIGHT button. The door springs 
open.

0 

Close: Press the door firmly closed.

When the unit is switched on, the DOOR/LIGHT display 
shows whether the door can be opened:

3 

The washing drum is illuminated when the door is open. The light goes 
out automatically after approx. 3 minutes.

Loading the washing

3 

For maximum loads, see “Programme Tables”.
For hints on how to prepare washing correctly, see "Sorting and prepar-
ing the washing“. 

0 

1.

Sort and prepare the washing by type and colour.

2.

Open the door: press the DOOR/LIGHT button. The door springs open.

3.

Load the washing.   

Important!

 Do not trap washing when 

closing the door. The fabrics and the ma-
chine could be damaged.

4.

Close the door firmly.

–

green: The door can be opened (not when programming is acti-

vated, see the section "Programme protection“ for details)

–

off:

Door cannot be opened

–

red:

Door is open

Содержание LAVAMAT 86741





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды