manualshive.com logo in svg

AEG LAVAMAT 84745, Информация пользователя

Поделиться
Скачать
AEG LAVAMAT 84745 Скачать руководство пользователя страница 18

Operating Instructions

18

Detergent and Conditioners

Which detergent and conditioners?

Only use detergents and conditioners that are suitable for use in wash-
ing machines. Always follow the manufacturer's instructions.

Quantities of detergent and conditioners?

The quantity to be used will depend on:

•

degree of soiling of the washing

•

degree of hardness of the water supply

•

load

2 

If the manufacturer does not indicate the amounts to use for smaller 
loads, for half-loads use a third less than the amount recommended for 
a full load, and for smaller loads and EASY IRON use half the amount 
recommended for a full load.
Please follow the detergent and conditioner manufacturers’ instruc-
tions for use and dosing recommendations.

Water softening

For medium to high water hardness (hardness class II upwards) a water 
softening agent can be used. Refer to the manufacturer's instructions. 
Then always add the appropriate amount of detergent (underdosing) 
for hardness class I (soft). Your local Water Authority can advise you on 
the hardness of the water in your area.

Water hardness details 

 

Hardness class

Water hardness in °dH 

(German hardness scale)

Water hardness in ppm

(Parts Per Million)

I - soft

0 - 7

to 125

II - medium hard

7 - 14

125 - 250

III - hard

14 - 21

250 - 375

IV - very hard

greater than 21

greater than 375

Содержание LAVAMAT 84745

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды