10.11
Opening the door
While a programme (or the Finish In)
operates, the appliance door is locked.
The indicator
is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
To open the door during the first
minutes of the cycle (or when the
Finish In operates) :
1.
Touch the button
Start/Pause
to
pause the appliance.
2.
Wait until the indicator
goes off.
3.
You can open the door.
4.
Close the door and touch the button
Start/Pause
again. The programme
(or the Finish In) continues.
10.12
At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display comes on.
• The indicator of the button
Start/
Pause
goes off.
• The door lock indicator
goes off.
• You can open the door.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Press the button
On/Off
for some
seconds to deactivate the appliance.
• Close the water tap.
• Keep the door and the detergent
drawer ajar, to prevent the mildew
and odours.
The washing programme is completed,
but there is water in the drum:
• The drum turns regularly to prevent
the creases in the laundry.
• The indicator
flashes to remind
you to drain the water.
• The door lock indicator
is on. The
indicator of button
Start/Pause
flashes. The door stays locked.
• You must drain the water to open the
door.
Draining the water:
1.
To drain the water.
• Touch the button
Start/Pause
.
The appliance drains the water
and spins with the maximum spin
speed for selected washing
programme.
• Alternatively, touch the button
Spin to change the spin speed
and then touch the button
Start/
Pause
. The appliance drains the
water and spins. If you set , the
appliance only drains.
2.
When the programme is completed
and the door lock indicator
goes
off, you can open the door.
3.
Press the button
On/Off
for some
seconds to deactivate the appliance.
10.13
AUTO-OFF option
The AUTO-OFF stand-by option
automatically deactivates the appliance
to decrease the energy consumption. All
the indicators and the display go off
when :
• You do not use the appliance for 5
minutes before you touch the
Start/
Pause
.
Press the button
On/Off
to activate
the appliance again.
• After 5 minutes from the end of the
washing programme.
Press the button
On/Off
to activate
the appliance again.
The display shows the end of the last
set programme.
Touch the button
Programmes
if you
want to set a new cycle.
11.
HINTS AND TIPS
11.1
The laundry load
• Divide the laundry in: white, coloured,
synthetics, delicates and wool.
• Obey the washing instructions that
are on the laundry care labels.
• Do not wash white and coloured
items together.
ENGLISH
15
