dedetergente main distributor.
2.Start flow program daágua.
12.9 Precautions ice afformation
If the appliance is installed in a localonde the
temperature may be less than 0 ° C, remove the
remaining water mangueirade inlet and drain pump.
1.Disconnect the plug from the electrical outlet.
2.Close the water tap.
3.Put the two input damangueira ends within
umrecipiente and let the water out of
hose.
4.Empty pump escoamento.Consulte emergency
deescoamento the procedure.
5.When the pump empty escoamentoestiver,
reinstall input amangueira.
WARNING!
Before using novamenteo device,
make sure the temperature ésuperior
deck at 0 ° C Maker not
seresponsabiliza by quaisquerdanos
caused by baixastemperaturas.
13. TROUBLESHOOTING
WARNING!
See the capítulosrelativos
security.
13.1 Introduction
The device does not come into funcionamentoou
stops during funcionamento.Comece for trying to find
umasolução to the problem (see table by). If not,
contact umCentro of TécnicaAutorizado assistance.
Some problems are emitidossinais sound and the
display shows alarm umcódigo:
•
- The appliance does not fill with
Water properly.
•
- The appliance does not drain the water.
•
- The door is
open or not well fechada.Verifique the door.
•
- Electrical power is
unstable. Wait until the correnteeléctrica
stabilize.
•
- There is no communication between the
electronic elements aparelho.Desligue and
reconnect.
WARNING!
Disable the device antesde perform
the checks.
13.2 possible failures
Problem
possible solution
The program does not inicia.Certifique that the plug is inserted into the electrical outlet.
Make sure that the appliance door is closed.
Make sure that there is a circuit breaker off in quadroeléctrico.
Make sure you have pressed the Start / Pause button.
PORTUGUESE
21
Содержание LAVAMAT 68280FL
Страница 19: ...1 2 1 2 2 1 1 3 4 1 2 5 1 2 6 7 8 2 1 PORTUGUESE 19 ...
Страница 42: ...3 4 1 2 5 1 2 6 7 8 2 1 9 2 1 www aeg com 42 ...
Страница 48: ...www aeg com shop 192971790 A 392014 ...