26
Installation and connection instructions
1
Safety information for the installation
•
This washing machine
cannot be built-in
.
•
Before using for the first time, check the appliance for damage sus-
tained while it was being transported. Do not under any circumstanc-
es connect an appliance that is damaged. In the case of damage,
please contact your supplier.
•
Before using for the first time, all parts of the transport lock must be
removed. Otherwise when spinning damage may be caused to the ap-
pliance or to neighbouring units or furniture.
•
Before using the appliance for the first time, splash protection must
be completed. (See “Removing the transit packaging”.)
•
Always plug the mains plug into a correctly installed shockproof
socket.
•
Permanent connection: a permanent connection must only be in-
stalled by a trained electrician.
•
Prior to using the appliance for the first time, ensure that the rated
voltage and type of supply on the rating plate match that of the sup-
ply where the appliance is to be installed. The fuse rating is also to be
found on the rating plate.
•
If work on the plumbing is required for the proper connection of the
washing machine to the water supply, this must be undertaken by a
registered plumber.
•
If work on the electricity supply system is required for the proper
connection of the washing machine to the electricity supply, this
must be undertaken by a registered electrician.
•
The washing machine’s cable must only be replaced by the Customer
Care Department or a registered electrician.
Installing the appliance
Transporting the appliance
1
Warning!
The washing machine is very heavy. Risk of injury. Be careful
when lifting.
•
Do not lay the appliance on its front nor on its right side (as seen
from the front). Electrical components may get wet.
