AEG LAVAMAT 16850A3, Руководство пользователя

Страница: 17 / 48

• select the draining or spinning programme
• reduce the spin speed if needed, by pressing the relevant button
• press the button
7
• when the programme has finished the display shows a blinking . On the display the
DOOR symbol disappears. The door can now be opened.
Turn the programme selector dial to to switch the machine off. Remove the laundry
from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant smells.
Stand by : once the programme has finished after a few minutes the energy saving system
will be enabled. The brightness of the display is reduced. By pressing any button the appli-
ance will come out of the energy saving status.
USE - DRYING
Drying only
The recommended load size is 4 kg for cottons and linen, and 2 kg for synthetic items.
The water tap must be open and the drain hose must be positioned in the sink or con -
nected to the drain pipe.
1. Load the laundry.
2. Select a spin cycle at the maximum spin speed allowed for the type of laundry in order
to obtain the best drying performances.
3. Select the drying programme for Cottons or Synthetic in the Drying sector of the pro-
gramme selector dial. The DRYING and the ANTI - CREASE symbols corresponding to the
phases making up the programme appear on the display.
At the same time, the symbols corresponding to the level degrees allowed by the set
programme/fabric and «AUTO» lights up.
4. – Set the automatic drying (button 3) .
With this button you can select the degree of dryness by an electronic drying. The
machine adapts automatically the duration of the drying cycle to the selected de-
gree of dryness.
If you press this button, a black dash appears under the selected symbol to indicate
the degree set. The message «AUTO» disappears. The display shows the duration of
the drying cycle.
The pilot light of button
7
starts blinking. Press then button
7
to start the pro-
gramme. A black dash flashes under the DRYING symbol.
– Set the timed drying (button 4)
Press this button, until the time you want appears on the display. Select the dura-
tion of the drying cycle from 10 to 250 minutes according to the type of fabric (cot-
ton or synthetic). Every time you press this button the drying time increases by 5
minutes.
17