To empty out water:
• press the START/PAUSE button: after emptying, the machine performs
the spin cycle required for the type of wash selected;
• select the spin speed and then press START/PAUSE;
• select the DRAIN programme
to empty out the water without
spinning.
Warning!
The programme selector dial must be turned first to
OFF
and
then to the DRAIN programme.
If the water is not emptied out, the machine automatically empties
itself after 18 hours.
The RINSE HOLD option
cannot
be selected for the automatic WASHING
&
DRYING programme.
Display
The display shows the following information:
•
Duration of the selected programme (in minutes)
, calculated auto-
matically on the basis of the maximum recommended load for each type
of fabric.
•
Selected drying time
(max. 130 minutes for cotton, 100 minutes for
synthetics).
After the programme has started, the time remaining is updated every
minute.
• When the programme has finished,
a steadily lit zero
is displayed.
•
Delayed start,
(19 hours max.) programmed using the special button
. The countdown is updated every hour.
•
Alarm code
indicating a fault in the machine operation (see page 37).
Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running
phase pilot light stays on. When the programme
has finished, the END
pilot light comes
on.
15
Description of the appliance
MAIN WASH
EXTRA RINSE +
RINSES
END
OVERDOSAGE
SPIN
DRYING
PREWASH
132994940.qxd 9/11/02 3:27 PM Pagina 15 (Nero/Process Black pellicola)