If the
(RINSE HOLD) option has been selected, the water must be
emptied out before opening the door either
- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)
- or by selecting the SPIN SPEED and depressing the START/PAUSE
button
- or by turning the selector dial to
O
and then to DRAIN “
C
” and
pressing the START/PAUSE button again. In this case the water will be
emptied, but the laundry is not spun.
Turn the selector dial to
O
.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
Automatic washing and drying
(NON-STOP programme)
Warning!
For NON-STOP programmes, it is also essential not to exceed
the maximum load sizes of 2.5 kg for cotton and 2 kg for synthetics.
Load the laundry.
Add detergent and additive.
Do not use a dosing device/ball when carrying out a washing
&
dry-
ing programme.
Select the wash programme.
Select eventually the required options by means of the relevant buttons.
If possible,
do not select
a spin speed lower than that proposed by the
appliance to avoid a too long drying time so saving energy.
By automatic washing and drying it is not possible to select a spin speed
lower than 900 r.p.m. for cottons and 700 r.p.m. for synthetics.
Select the drying time.
Start the programme by depressing the START/PAUSE button.
At the end of the programme, turn the selector dial to
O
.
Remove the laundry.
29
How to wash
132994710 gb.qxd 12/11/02 3:28 PM Pagina 29 (Nero/Process Black pellicola)
