AEG L9WEE06W, Руководство пользователя

Страница: 15 / 52

6. DIAL AND BUTTONS
6.1 Aan/Uit - Marche Arrêt
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
6.2 Introduction
The options/functions are
not selectable with all
washing programmes. Check
the compatibility between
options/functions and
washing programmes in the
"Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
6.3 Temperatuur -
Température
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and , the appliance does not
heat the water.
6.4 Centrifugeren - Essorage
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
• Decrease the spin speed.
The display shows only
the spin speeds available
for the set programme.
• Set the drain-only option (Skipping
the wash, rinse and spin phases) :
Pompen - Vidange.
The appliance performs the only
draining phase of the selected
washing programme.
The display shows the indicator
(cold), and the indicator
(no
spin) and the indicator .
• Set the spin-only option (Skipping
the wash and rinse phases) : Alleen
centrifug. - Essorage.
Before setting this
option, select a suitable
washing programme for
the garments. The
appliance will performs
the most fitting spin cycle
for your garments care
(e.g. For synthetics items,
first select the Synthetica
- Synthétiques washing
programme and then the
Alleen centrifug. -
Essorage option).
The appliance performs only the
spinning phase of the selected
washing programme.
The display shows the indicator
(cold), the phase indicator and the
spin speed.
6.5
Vlek./Voorw. - Tache/
Prélav.
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
• Vlekken - Tache
Select this option to add an anti-stain
phase to a programme in order to
ENGLISH 15